-Event officials have full discretion to determine if a vehicle is accepted.
-No motor on axle rigs are allowed.
-There are no wheel distinctions. For example, you can run a 1.55, 1.7, 1.9, 2.2 rim in any class. No Wheels larger than 2.2.
-No bolt on or comp style wheel weight systems, such as dlux fab weight hangers. Wheels must have no foam exposed.
-Daily Driver and MUST have a minimum of 10 scale items.
-Example Scale Items : Tow Rope , Jerry can , First aid kit , Sand Ladder , Winch , Realistic Lockout Hubs , Shovel , Axe , Crate , Tool Box , Cargo rack , Cooler , Propane tank , Floor jack, Roto Pax , Rifle , Tools , D-ring , Snatch-Block , Land Anchor .
-Only Hardbodies allowed.
-Vehicles must have all windows installed other than the driver or passenger side.
-Full width bumpers are required on the front and the rear. Bumpers that are molded to the body will qualify. Bumpers must be as wide as the widest part of your front windshield. At no point can your tires exceed the bumpers. Bumpers MUST extend beyond the body.
-The body of the vehicle must be fully intact. No holes or cuts in the bed unless it is fully covered with a camper shell, realistic size wheel wells, or a bed cover. Removing of a hardtop is allowed such as jeeps or early model 4runners as long as floors and interior is fully installed.
-Flatbeds with full length rail chassis are allowed, flatbeds must be as wide as the cab to the back of the rear tires. Cab only is not allowed. No truggies or tubers..
-Fender wells are required on all four corners.
-No Pinching, dovetailing, bobbing, narrowing, or boat sides.
-Wheels must align within the wheel wells +/- ½” total combined.
-Full 3d interior is required and must include a minimum of these separate parts, dash, steering wheel, seats, and complete floor.
-At minimum you must include a complete driver figure from head to feet and must be at a minimum of 5” tall.
-Vehicles chassis must be a minimum of 2” longer than the wheelbase.
-Tires must be no larger than 4”
-The Tire tread must be completely inside the fenders. The track width cannot have any tread beyond the inside of the body or flairs.
