-Event officials have full discretion to determine if a vehicle is accepted.
-No motor on axle rigs are allowed.
-There are no wheel distinctions. For example, you can run a 1.55, 1.7, 1.9, 2.2 rim in any class. No Wheels larger than 2.2.
-No bolt on or comp style wheel weight systems, such as dlux fab weight hangers. Wheels must have no foam exposed.
-Tire must be 4.19” or less, no tire modifications allowed.
-Wheelbase must be no more than ½” larger or shorter than the body from center of the front wheel well to center of the rear wheel well.
-Full width front and rear bumpers are required. Bumpers MUST extend beyond the body. Bumpers must be at least the width of your front windshield at its widest point.
-Hard Bodies are required (No Lexan).
-No Pinching, dovetailing, narrowing, or boat sides.
-Mild trimming around the fender wells and bobbed beds will be allowed.
-Front windshield is required.
-A 2d or 3d interior is required.
-No truggies or tubers.
-Chassis rails must be 1” longer than wheelbase.
-Flatbeds are allowed as long as they are the same width as the cab at its widest point and the length is beyond the frame rails.
-Gates will be a minimum of 11” wide .
-Tires cannot exceed more than half the tread width beyond the width of the body. Flares can be used to extend the width if needed.
