U4 SOLID AXLE CLASS SPECIFICATIONS
-Acceptable Rigs : Any 1/10 RC Scale Vehicle that has a front and rear solid axle and a tubed Roll Cage(Plastic or Metal). You may custom and add a tube roll cage to any RC that is 1/10 Scale that has a front and rear solid axle.
Max Wheel and Tire Size: Max 2.2 wheel, Max 6” Tire, NO SCT tires or wheels. Must have 12mm hex.
U4 IFS CLASS SPECIFICATIONS
-Acceptable Rigs : Any 1/10 RC Scale Vehicle that has Independent Front Suspension, rear solid axle and a tubed Roll Cage(Plastic or Metal). You may custom and add a tube roll cage to any RC that is 1/10 Scale that has Independent Front Suspension and a rear solid axle.
Max Wheel and Tire Size: Max 2.2 wheel, Max 6” Tire, NO SCT tires or wheels, must have 12mm hex.
U4 FIS CLASS SPECIFICATIONS
-Acceptable Rigs : Any 1/10 RC Scale Vehicle that has Full independent suspension front and rear, and a tubed Roll Cage(Plastic or Metal). You may custom and add a tube roll cage to any RC that is 1/10 Scale that has Full independent suspension front and rear.
Max Wheel and Tire Size: Max 2.2 wheel, Max 6” Tire, NO SCT tires or wheels. Must have 12mm hex.
5 min heat races to setup drivers for the mains. Number of drivers per class will determine number of heats and whether there will be semis or lcq races before the main. 1st, 2nd, 3rd per class.
Up-Hill Rock Racing
2 Classes Metal Cage and Plastic Cage
We will run 3 Hills, one run each hill with a one minute time limit per hill. If all 4 tires go out of bounds it is a DNF. The overall time limit per hill will be 1hr 15 minuets with a 10 to 15 minute break in-between hills to set up timer and move rig’s change batteries etc. If you miss any hill we will not go back and re-run however you can continue to race getting a DNS 0 points for the hill or hills you missed. The Racer on Deck will need to put their Rig in the starting box as soon as the previous rig leaves the starting gate. We will have a lot of drivers and need to keep things going.
Rules:
MUST BE SHAFT DRIVEN*
Examples of Acceptable rigs - 1/10th scale
Axial Bomber, Wraith, Yeti, Ryft
G-Made GOM
Losi Rock Rey
(excluded: Slash, Revo, UDR, Yeti XL, SCX10, SCX10 ii, short course vehicles,etc…)
**Custom RC Rock Bouncer Chassis’**
Must be a round tube or solid rod chassis, either plastic or metal.
The chassis must resemble a rock bouncer or Ultra 4 car.
Twin Vertical Plates (TVP) are not allowed. Comp RC Crawler chassis’ are not allowed.
Short course cars are not allowed
Scoring:
1/2 hill completed 2 points
Hill Completion 5 points.
All Hill Completions or 1/2 way will receive points, 1st per hill is the fastest time. The points includes the 5 points for hill completion.
1st 35 points
2nd 33 points intentionally dropping 2 points to 2nd place. This is not an error
3rd 32 points
4th 31 points
5th 30 points
Points continue descending 6th through 29th with 29th getting 6 points assuming hill is completed by those drivers.
Last hill completion or from 30th to last driver will receive, 5 points for hill completion or will receive 2 points for 1/2 way or 0 points for DNF or DNS
All the points will be combined for all 3 hills to determine the winner’s for 1st, 2nd and 3rd places